Specification
-Products ID:ST-RJ45
-Peak Current Normal Mode:10.0 kAmps
-Peak Current Common Mode:5.0 kAmps
-Nominal Operating Voltages:
-Line-Line(Un): 5 Volts
-Line-Line(Uc): 8 Volts
-Line-Ground: 90 Volts
-Nominal discharge currents :
-Line/Line: < 5KA （8/20μs）
-Line/Ground: 10KA （8/20μs）
-NM Surge Response Time (ns):
-Line/Line: < 5ns
-Line/Ground: < 100ns
-Material:
-High insulation resistance
-Cast aluminum construction
-Environmental
-Operating Environment -40-70°C(-40°F to +158°F)
-Operating Relative Humidity 0 – 95%
-Data Line Protection:RJ45 10/100/1000 Base-T Ethernet
-Protection Modes:Line-Line, Line-Ground
-7.5 inch green ground wire
-Standard Connectors RJ-45 Female * 2
-Case Color Silver
-Outside Dimensions (W*L*H) 26*26*62 mm
-Weight 65 g
-RoHS compliant
How I installed the ST-RJ45:
Once you know how it’s done, it’s rather easy to install this product, but a simple diagram to supplement the written
instructions would have made it much clearer.
– The cable from the DSL ISP goes into the input port of the ST-RJ45
– The cable from the modem connects to the equipment port of the ST-RJ45
– The green ground wire is connected to the ground screw of the UPS
✔ Imax=10KA, Isn=5KA; 7.5 inch green ground wire
✔ NM Surge Response Time (ns): 1 ns
✔ Interface Connection Type: RJ45 Female to Female
✔ Earthing Method: Direct Grounding System by Connecting Line
✔ Data Line Protection: RJ45 10/100/1000 Base-T Ethernet
Reviews
There are no reviews yet.